Characteristics of the SCALA2 G1 self-priming pump: - Product: SCALA 2 3-45 A - Reference: 98562862 - Nominal flow: 3 m3/h - Nominal height: 27 m - Maximum height: 45 m- Maximum horizontal distance: 50 meters- Minimum horizontal difference in level: 2º- Minimum sound pressure level: 47 dB(A)- Maximum sound pressure level: 53 dB(A) - Curve tolerance: ISO09906:2012 3B - Ambient temperature range: 0 to 55✬ - Maximum working pressure: 10 bar - Maximum allowed inlet pressure: 6 bar - Pipe connection: G 1 Composite - Pumped liquid: water - Liquid temperature range: 0 to 45✬ - Liquid temperature during operation Wind: 20✬ - Input power - P1: 550 W - Mains frequency: 50 Hz - Rated voltage: 1 x 220-240 V - Rated current: 2.8 A - Degree of protection (IEC 34-5): IPX4D - Insulation class (IEC 85): F - Net weight: 9. SCALA2 does not require extensive maintenance, although it is recommended to keep the pump clean, check valves retention and keep the ventilation holes free of obstructions. The built-in pressure tank reduces the number of starts and stops in case of leaks in the piping system, thus causing less wear on the pump. The maximum noise level at full load is 53dB (A). Thanks to its hydraulic design, permanent magnet motor and water cooling, the pump has a noise level really low, 47 dB(A) in typical use, making it suitable for indoor and outdoor use. It restarts itself up to a maximum of 8 times every 5 minutes and a last attempt 24 hours after the incident. In addition, the pump has an automatic restart system that in case of dry running or similar alarm, the pump stops. If exposed to dry running, lack of water or excessive temperature, pump blocked, in case of overload, the pump will stop automatically preventing the motor from burning out. This makes it easy to install and start up the pump and provides a reliable supply of water in installations where there is a risk of dry running or pipe leaks. As it is a self-priming unit, SCALA2 can pump water below its level, it is capable of raising it from a depth of up to 8 meters in less than 5 minutes. SCALA2 incorporates all the necessary components to ensure adequate pressure: smart controller, integrated speed control motor, integrated tank, integrated sensors and integrated non-return valves. Installation can be carried out simply by following three basic steps: Connect pipes, prime the pump and plug the pump connector to the network. SCALA2 incorporates a speed control that allows the proper pressure to be maintained in the taps, that is, the performance of the pump increases if the demand increases. SCALA2 require no maintenance, but it is recommended to keep the pump clean, check the non-return valves and keep the ventilation holes free of dust.The Grundfos SCALA2 self-priming booster set is a compact booster set that supplies constant water pressure in domestic applications. The built-in pressure tank reduces the number of starts and stops in case of leakages in the pipe system, causing less wear on the pump. Compact Robust and reliable Easy installation and self-priming.It is compact, quiet and has a calendar function. Its quiet, easy to install, and maintains consistent pressure in all taps at all times. It is designed for perfect pressure inside the home. SCALA2 is an integrated, self-priming, compact water booster pump. SCALA1 is an all-in-one pressure booster pump for domestic use in the home and irrigation in the garden. Suitable for: Domestic ground water intake. Adjustable constant pressure Low noise, Plug the pump into the power outlet and the pump will start. Accurate sizing of the pump can be based on the pump curve below and local norms and standards.ģ. Best for houses with up to three floors and eight tapping points. Suitable for pressure boosting of city mains water, pressure boosting of water from roof tank, pressure boosting of water from break tank, pressure boosting of water from ground tank, water supply from shallow wells (< 26 1/4 ft / 8 m). SCALA2 has integrated speed control which allows maintaining perfect pressure in the taps. It ensures a comfortable pressure. SCALA2 is a fully integrated, self-priming, compact pump designed for pressure boosting in domestic applications.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |